Blaupunkt's EMa260 2 channel amplifier gives you versatility and solid, all-around performance. The EMa260 puts out 55 watts of continuous power through 2 channels, or 160 watts in single-channel mode, so you can power a set of speakers or a single subwoofer. Built-in frequency filters let you adjust amp output to complement your speakers. A true classic Blaupunkt design. 

Blaupunkt EMa-260 Key Features:

Amplifier

• Number of channels : 2 Channel
• Max. Power (Watt): 350
• Power 2 Channel @ 4 Ohm: 2 x 110 Watts Max. (2 x 55 Watts RMS)
• Power 1 Channel @ 4 Ohm: 1 x 350 Watts Max. (1 x 160 Watts RMS)
• Power 2 Channel @ 2 Ohm: 2 x 160 Watts Max. (2 x 90 Watts RMS)
• Signal-/noise ratio at nominal power (dB: >90
• Signal-/noise ratio at 1 Watt (dB): >73
• Distortion factor at nominal power (1 kHz): <0,05
• Frequency response (Hz) -1dB: 10-25.000
• Attenuation factor at 4 Ohm: >100
• Stability normal mode (Ohm): 2
• Stability bridge mode (Ohm): 4
• Input impedance (kOhm): >10
• Input sensitvity (V): 0,3-8
• High-pass filter crossover frequency (Hz): 50-250
• High-pass filter edge steepness (dB/Octave): 12
• Low-pass filter crossover frequency (Hz): 50-250
• Low-pass filter edge steepness (dB/Octave): 12
• Bass Boost setting range (dB): 0-12
• LED for protect-mode: Yes

Inputs

• Permanent supply: Yes
• Ground: Yes
• Max. cable diameter (mm²): 10
• Ignition supply: Yes
• Surface connector: Silver

Outputs

• Loud speaker (number of): 2
• Loud speaker (connection type): Screw
• Loud speaker (max. cable diameter in mm²): 6
• Connector material: Silver

Housing

• Material: Aluminium extruded
• Color: Titanim
• Surface: Anodised, brushed

General

• Height x Width x Depth: 2.2 x 9 x 7.9 inches (56 x 230 x 200 mm)